RaptorMama

Kate eats a decent variety of foods considering she’s a preschooler, but veggies are still a bit of a sticking point.  Enter the mini cookie cutters.  Kate loves to use the cookie cutters and cucumbers are the perfect firmness for her.

First, peel and slice your cucumbers.  I slice them maybe 1/4 of an inch thick?  Maybe a touch thinner?  Too thin and they don’t hold their shape well.

Then I give Kate a stack of slices and she punches out the pumpkins with the mini cookie cutter.

It’s nice because it took her a bit to punch all the way through which kept her occupied while I got everything else ready for the party.

And the veggie eating?  Well, Kate is more likely to eat cucumbers when they’re fun shapes, but even more than that I make her eat the leftover bits before she can punch out a new pumpkin.  Not in a militant way (at all, we avoid battles over food at our house) but she can’t punch out a new pumpin until she’s eaten the scraps from the last one.  Sometimes that means that she only punches out one pumpkin and that’s ok.  I’ll punch the rest (for her lunch or whatever) and put the scraps on salads.  But today we were punching a whole cucumber for our little party and she ate all of the scraps!  Honestly, I was amazed that she ate all of that.  I even gave her a pass after she’d eaten about half of them and told her that she could just keep punching if she wasn’t hungry, but she assured me that she wanted to eat more.  🙂

And here’s our veggie tray.  It was nice to be able to “cook” with Kate, but have her working on something independently so I could get everything else ready.

Here’s a fun little page I made with the new Echo Park line, some twine and some washi tape.

I’m always perplexed with what to do with twine. I love the look of it, but how to attach it… This time I literally wrapped it around the paper and then secured the ends with some tape on the back. Easy peasy.

Then I just tied on a few strips to give it some dimension. This is a super simple page, but I like it. It took me less than an hour to finish while Kate was at preschool.

I’ve had these acrylic hearts for ages and I recently unearthed them while cleaning my desk.

I peeled the back off and used it to trace the shapes onto some patterned paper.

Then I cut the heart out and ran it through my zyron machine.  You need to make sure that you run it through the machine wrong side up so that the adhesive is on the front of the heart.

I like to burnish the paper before removing the backing.  It helps the adhesive to stick.  I also inked the edges before running them through the machine.

I set the acrylic heart on top of the paper and hope to get them perfectly lined up.  Usually I do ok.  🙂

I used the acrylic hearts as embellishments on this page and I think it turned out quite cute.  🙂

The letters are from October Afternoon and the papers are all Echo Park.

 

I decided to continue with the mummy theme after finding this Pinterest gem.  I’ll be honest, cocktail sausages gross me out so I used organic hot dogs that I cut in half.  (If I’m being really honest, hot dogs gross me out too, but some sacrifices are necessary in the quest for cute party food.  🙂  )

I rolled out some crescent roll dough and cut it into strips.  Then I wrapped the strips around the hot dogs leaving a little gap for the face.

And baked them according to the directions on the crescent roll package.  Actually, I had to cook them for almost twice as long, but my oven sucks and I never remember to preheat it so I’d go with the package directions if I were you.  lol.

I skipped the mustard eyes because I was running short on time, but I still think they turned out cute.  They were all gobbled up so I’ll assume they were good.  🙂

Raptor Dad here, with a post that is a little more philosophical and a little less how to. Little Raptor loves to paint and be creative which makes me smile. I have a degree in art after all, it was what I dedicated my life to for the first 22 years. Unfortunately, Raptor often wants to be creative at times that seem inconvenient or what’s worse, she wants to paint the wrong way! The wrong way?

I know, I should know better. I went to an art school that frowned on illustration and I railed against the “system” insisting on putting illustrative work in the student show on more than one occasion just for the sake of doing it. That said, I grew up without a lot of money and was certainly poor in art school. That’s built-in a strong respect for the tools. It flusters me when Raptor wants to mix paints the wrong way. Today, I decided I would take a step back, have a cocktail, and let her go nuts.

In the end it was easy to just sit back and let her do her thing. There was less stress for everyone and Raptor learned about mixing paint and cleaning brushes. Not just because I told her about it but because she got a practical lesson by seeing what happened when she didn’t clean the brush between strokes. It’s important to learn by doing and I think that we, as first time parents, sometimes have a hard time letting Raptor do that.

 

 

 

I usually try to scrap at least somewhat chronologically, (and I’m still working on March and April) but I couldn’t resist my new Halloween Paper!  It’s by October Afternoon, my current favorite manufacturer.  🙂

My general MO for 2 page layouts is to cut one piece of patterned paper in half and put it on the far edges.  Then I’ll put 3 photos down each side.  This essentially leaves me with a 12×12 space and it’s much easier for me to figure out how to lay things out in a square.  🙂

I used some Thickers and letter stickers (October Afternoon and Athentique) to make the title and added a bit of washi tape for fun.

I just had to use this date sticker!

I used 3 different journaling spots because I wanted to list all of the fun things that we did.

I inked up the edges of everything to give it some dimension.  Oh, and I used this giant witch sticker.  Love the retro look!

A note on the black chevron paper.  I intended to have it run the length of the photos, but it’s from the 8×8 paper pad so it was too short.  No worries, I cut short pieces and just lined them up so you have the illusion that the paper continues.  Then I added a strip of washi tape so there was a vertical element.  Overall, I’m pretty happy with how this page ended up!

 

It should come as no surprise to those of you who know me that I love tutus.  I was searching for costumes with tutus when I came across this adorable Little Red Riding Hood costume.  Initially, I tried to recreate it exactly huge tutu and all.  I bought 11 yards of tule trying to recreate it and it ended up looking ridiculous.  I suspect that the original is some kind of sewn tutu and I only know how to make tied tutus which end up a lot poofier.  (Note to self: research sewn tutus before next year.)

So I scrapped the tutu and decided to use an existing red dress as the base of her costume.  I made a red cloak and an apron and then put her in her boots.

Michael and I decided that our Little Red could take care of herself so he modded a nerf gun.  He painted some wolves on the gun a la WWII fighter pilots so I decided to add one to her apron.  I think it turned out super cute!

When I saw these mummy juice boxes on Pinterst, I knew that I had to make them.  Thus the idea of a Halloween party was born!  I’m not one to read the directions, so I just noticed that she recommended using electrical tape.  I used white duct tape and it worked great.  I also used milk boxes since we don’t often give Kate juice.

First, remove the straws!

Then cut 2 strips of duct tape and wrap them around the bottom of the milk box one on top of the other.  This makes a base layer that we’ll cover up with thinner strips later.

Then I taped on some Wilton candy eyes that were leftover from Kate’s birthday.

Now for the mummy wrapping.  Take a strip of duct tape, maybe 9 inches long, and cut two short slits in it.  Use them as guides to tear the duct tape into 3 strips.  Tearing it gives it a rougher edge than cutting it, at least on the torn sides.

Then just start wrapping the strips around the milk box taking care not to cover the eyes or the hole for the straw.

Here’s the first one that I did before I wised up and added the base strips and the eyes first.

I cut some smaller strips to go over the top and fill in the gaps.

And here’s the finished product!  I think they turned out super cute.  🙂

 

I bought a yard of this scrumptious halloween fabric a few weeks ago at Joannes with the intention of making a table runner.  It was like $10 a yard (on sale) so I didn’t want to pony up enough money to make a whole table cloth.

Well, I found a table cloth that I loved at Target (bonus, it can be washed!) so I scrapped the table runner idea and waited for inspiration to strike.  I wanted to make some kind of banner anyway (Kate loved the Valentines Day one so much we left it up until April) so I decided to use this fabric to make a penant one.

First I cut the fabric into 10 inch strips with the rotary cutter.  Then I played around with the angle of the flags until I liked the look of it.  I ended up making the cut at 4 inches (so 4 squares.)  Now I could go all high school pre-cal on you and try to figure out the angle… wait, no I can’t.  lol.  Basically, the flag is 8 inches across, 4 inches from each right angle.

Could I be making this any less clear?  lol.  Cut some triangles, mkay?

Then I cut some skull ribbon into strips and laid it all out on some bat ribbon.  First, I tried a zigzag stitch thinking it would help hold the lightweight fabric better, but it looked strange with the bat ribbon so I ripped it out and did a straight stitch.

I so love the way it turned out.  Now, I cut waaaaay too many triangles.  Any thoughts on what else I can do with them?

Still plugging along with this project.  I decided to order a bunch more paper in another line (It was October Afternoon!  I couldn’t help myself!) so I’m no longer trying to stretch this paper pack to the limit.  Yay for layering!  🙂

We had a busy day with lots of photos on the 5th, so I added an extra page.

It’s maybe 5×6 so you can see the bottom of day 6 peeking through underneath.  I love that about minibooks.  🙂

   

Day 6 was another big day- we went to the pumpkin patch!

I wanted to include a lot of pictures, so I resized some in turbocollage before I printed them.

And I added another smaller page.  You can see day 7 peaking out.

I usually do at at least 1 6×6 page for each day and then add in smaller pages as needed, but I went with a smaller main page for day 7.  I wanted to use 2 hipstamatic prints from my phone and I liked the way they looked on the smaller page.